FAQ — Iron-On Instructions & Help
What types of materials can I use these patches on?
You can apply iron-on patches and stickers to: cotton, polyester, polycotton blends. Denim, canvas, tote bags, and sneakers. Nylon (with special low-temperature vinyl). Avoid stretchy materials like lycra/spandex and waterproof coatings unless explicitly supported.
How do I apply vinyl (HTV / Flex) patches?
Place the patch with the adhesive (sticky) side down, facing the fabric.
on your garment.Cover with parchment paper or a clean cloth. Iron for 10–15 seconds with firm pressure, no steam (cotton setting). Let cool 5 seconds, then
peel off the plastic layer. Important: Cover again with paper and
iron once more for 5–10 seconds. This second press ensures better adhesion and long-lasting results.
How do I apply full-color (printed) iron-on transfers?
Place the design, cover with paper or Teflon sheet.Press once with firm heat (around 150°C). Peel off the carrier sheet while warm or hot (depends on vinyl type).Second press is optional but not necessary for most printable vinyls. Always test with the included sample if you're unsure.
How do I apply embroidered patches?
Place the patch where you want it. Cover with paper/fabric and press with firm pressure for 15–20 seconds .Let it cool a bit, then press from the reverse side for 10 more seconds. Optional: add a few stitches for high-friction items (bags, caps).
Can I wash my clothes after applying a patch?
Yes — but always: Turn inside out before washing. Wash at 40°C max (104°F)
Avoid bleach or harsh chemicals. Do not dry clean or tumble dry at high heat.
My patch started peeling off — what should I do?
Simply reheat! Put the patch back in place. Cover with parchment paper. Press again for 10–15 seconds In most cases, this restores adhesion completely.
What if I make a mistake when applying?
Every order includes a free sample — use it to practice first!
If you damage your main patch, contact us with a photo and we’ll send you a free replacement.
Do I need a heat press?
No, all patches can be applied with a regular home iron. Just be sure to apply firm, even pressure and use a dry setting (no steam).
Still need help or want a custom logo?
Email us anytime at contact@iron-on.com — we’re happy to help.